Storage Expansion

You can expand the amount of storage after a Teradata Database single-node or MPP instance is deployed without increasing the AMP count or reconfiguring the system. Expanding storage increases each EBS volume on the system, but does not increase the parallelism of the system.

If you want to increase the CPU, memory, and storage bandwidth of the nodes, you should change the instance type instead of expanding EBS storage.

If you want to keep the AMP count and instance type the same, but change the node count, CPU count, memory size, and network and storage bandwidth of the system, you should unfold or fold instead of expanding EBS storage.

The following table describes the storage expansion requirements.

Requirements
Instance type The system must have been deployed with EBS storage and with an m4.4xlarge, m4.10xlarge, or m4.16xlarge instance type.
Maximum storage sizeThe total storage on the system can only be expanded up to 3 TB per EBS volume.

The following table describes some limitations you should consider before expanding storage.

Limitations
Cool down periodAfter storage is expanded successfully once, you must wait 6 hours before expanding again.
Size increaseExpanding storage only increases the storage capacity of the EBS volumes. It does not decrease the storage capacity of the system.

results matching ""

    No results matching ""